Plasma Cutting Consumable Parts F012 Electrode(Cathode)11.855.411.320 for Kjellberg
What are plasma cutter consumables?
Plasma cutter consumables are a set of components in your plasma cutter that gradually wear over time until they need to be replaced: they have a life cycle. The consumables are all found in the cutting torch itself, which is where most of the energy is focussed, and keeping track of wear and tear is a key part of maintaining an efficient machine that cuts well and lasts a long time. Plasma cutting torch consumables include: a swirl ring, electrode, nozzle, retaining cap, and shield cap.
Product Description
Electrode:
The electrode is a narrow piece of copper containing hafnium (which is an excellent conductor of electricity). Its job is to receive the electrical current from a cathode block inside the torch to which it is connected, and to focus the charge through its tip, which causes it to arc onto the workpiece.
Nozzle:
The nozzle focuses the plasma arc and the gas that surrounds it to make a clean and precise cut. A nozzle with a larger
opening is used for gouging, while a nozzle with a smaller opening is better able to direct the gas and so is used for fine, detailed work.
Retain cap:
The retain cap essentially holds all of the consumable parts of the torch together. As temperatures at this end of the machine are extremely high, it's not just the parts creating and focussing the arc that are worn down; the component holding them together also degrades over time.
Shield:
The shield is there to protect the torch and its other components from the sparks and molten metal that result from the plasmacutting process. It takes the brunt of the fallout so that wear to other components is minimised as much as possible.
Swirl ring:
The function of the swirl ring is to spin the plasma gas which has two main results; 1, The spinning gas is gyroscopically stabilised a bit like a bullet making the plasma column less tendency to deflect.
Water tube:
Provides coolant to tip of the electrode to prevent overheating and failure. It is extremely important to use the proper sized water tube. An improper water tube can cause premature electrode failure due to overheating and electrical short circuiting.
Application
Package and Delivery
Consumable list
| Allwin Plasma consumables are replacement suitable for Kjellberg Finsterwalde Smart Focus 100/200/300/400 systems (for PerCut® 4000 plasma torches) |
| 1 |
.11.855.401.081 |
F501 |
Protective cap 35-200A |
| .11.855.421.081 |
F521 |
Protective cap 300-400A |
| 2 |
.11.855.411.1520 |
F4120 |
Swirl gas cap 35A |
| .11.855.401.1520 |
F4020 |
Swirl gas cap 55-60A |
| .11.855.401.1525 |
F4025 |
Swirl gas cap 55A |
| .11.855.401.1530 |
F4030 |
Swirl gas cap 90-200A |
| .11.855.401.1535 |
F4035 |
Swirl gas cap 130-200A |
| .11.855.401.1540 |
F4040 |
Swirl gas cap 200A |
| .11.855.421.1550 |
F4250 |
Swirl gas cap 300-400A |
| .11.855.421.1535 |
F4235 |
Swirl gas cap 300A |
| .11.855.421.1540 |
F4240 |
Swirl gas cap 300-400A |
| .11.855.421.1545 |
F4245 |
Swirl gas cap 300-400A |
| .11.855.421.1555 |
F4255 |
Swirl gas cap 360-400A |
| .11.855.451.1530 |
F4530 |
Swirl gas cap 130A |
| .11.855.451.1540 |
F4540 |
Swirl gas cap 200A |
| 3 |
.11.855.401.1604 |
F3004 |
Nozzle cap 35A |
| .11.855.401.1608 |
F3008 |
Nozzle cap 55-200A |
| .11.855.401.1618 |
F3018 |
Nozzle cap 130A |
| .11.855.401.1628 |
F3028 |
Nozzle cap 60-200A |
| .11.855.421.1609 |
F3209 |
Nozzle cap 300-400A |
| .11.855.421.1619 |
F3219 |
Nozzle cap 300-400A |
| .11.855.421.1629 |
F3229 |
Nozzle cap 360-400A |
| .11.855.421.1649 |
F3249 |
Nozzle cap 300-400A |
| 4 |
.11.855.401.407 |
F2007 |
Nozzle 35A |
| .11.855.401.408 |
F2008 |
Nozzle 60A |
| .11.855.401.410 |
F2010 |
Nozzle 55-90A |
| .11.855.401.412 |
F2012 |
Nozzle 130A |
| .11.855.401.414 |
F2014 |
Nozzle 130-160A |
| .11.855.401.417 |
F2017 |
Nozzle 200A |
| .11.855.421.427 |
F2227 |
Nozzle 300A |
| .11.855.421.430 |
F2230 |
Nozzle 360A |
| .11.855.421.431 |
F2231 |
Nozzle 400A |
| .11.855.461.628 |
F2628 |
Nozzle 400A |
| .11.855.451.614 |
F2514 |
Nozzle 130A |
| .11.855.451.615 |
F2515 |
Nozzle 200A |
| .11.855.461.625 |
F2625 |
Nozzle 300A |
| 5 |
.11.855.401.350 |
F005 |
Cathode/electrode 130-160A |
| .11.855.401.360 |
F006 |
Cathode/electrode 200A |
| .11.855.411.320 |
F012 |
Cathode/electrode 35-90A |
| .11.855.421.320 |
F022 |
Cathode/electrode 300A |
| .11.855.421.340 |
F024 |
Cathode/electrode 360-400A |
| .11.855.451.520 |
F052 |
Cathode/electrode 130-200A |
| .11.855.461.550 |
F065 |
Cathode/electrode 300-400A |
| 6 |
.11.855.401.142 |
F902 |
water/Cooling tube 35-200A |
| .11.855.421.141 |
F921 |
water/Cooling tube 300-400A |
| .11.855.441.141 |
F941 |
water/Cooling tube 55-200A |
| .11.855.461.143 |
F963 |
water/Cooling tube 300-400A |
| TORCH MODEL :PerCut 4000 (mild steel-- 1.0037 S235) |
|
| PRODUCT |
AMP |
CODE |
| Water Tube/Cooling Tube |
35~200A |
F902 .11.855.401.142 |
| 300~400A |
F921 .11.855.421.141 |
| 400A |
F963 .11.855.461.143 |
| Electrode/Cathode |
35~90A |
F012 .11.855.411.320 |
| 130~160A |
F005 .11.855.401.350 |
| 200A |
F006 .11.855.401.360 |
| 300A |
F022 .11.855.421.320 |
| 360~400A |
F024 .11.855.421.340 |
| 400A(Ar/H2) |
F065 .11.855.461.550 |
| Gas Guide/Swirl ring |
35~200A |
G101C .11.848.221.145C |
| 300~400A |
G121C .11.848.421.145C |
| 400A(Ar/H2) |
G125 .11.848.421.149 |
| Nozzle |
35A |
F2007 .11.855.401.407 |
| 60A |
F2008 .11.855.401.408 |
| 90A |
F2010 .11.855.401.410 |
| 130A |
F2012 .11.855.401.412 |
| 160A |
F2014 .11.855.401.414 |
| 200A |
F2017 .11.855.401.417 |
| 300A |
F2227 .11.855.421.427 |
| 360A |
F2230 .11.855.421.430 |
| 400A |
F2231 .11.855.421.431 |
| 400A(Ar/H2) |
F2628 .11.855.461.628 |
| Nozzle Cap |
35A |
F3004 .11.855.401.1604 |
| 60~200A |
F3028 .11.855.401.1628 |
| 300A/360A/400A |
F3219 .11.855.421.1619 |
| 360A |
F3229 .11.855.421.1629 |
| 300A/400A |
F3249 .11.855.421.1649 |
| 360A/400A/400A(Ar/H2) |
F3209 .11.855.421.1609 |
| Swirl Gas Cap / Shield |
35A |
F4120 .11.855.411.1520 |
| 60A |
F4020 .11.855.401.1520 |
| 90A~200A |
F4030 .11.855.401.1530 |
| 200A |
F4035 .11.855.401.1535 |
| 200A |
F4040 .11.855.401.1540 |
| 300~400A |
F4250 .11.855.421.1550 |
| 360~400A/400A(Ar/H2) |
F4255 .11.855.421.1555 |
| Protection Cap |
35~200A |
F501 .11.855.401.081 |
| 300~400A |
F521 .11.855.421.081 |
FAQ
Question: Can I have a visit to your factory before the order?
Answer : Yes, look forward to communicating and cooperating with you!
Question: Can I test that sample?
Answer : Yes, we can support sample at a reasonable charge.
Question: Can I put my logo on the boxes/cartons?
Answer : Yes, we have a capability and professional efficient team, provide OEM and ODM .
Question: Are you a trading company or manufacturer ?
Answer : We are factory, also do trading company business.
){kind=link}